Teledyne FLIR will showcase its thermal and acoustic inspection technologies at Oil & Gas Asia (OGA) 2026, taking place from September 2 to 4 at the Kuala Lumpur Convention Centre. Reliability and maintenance professionals visiting Booth 2907 in Hall 2 will be able to experience four camera families designed to identify equipment problems before they lead to costly downtime. The portfolio includes the iXX-Series, Exx-Series, T-Series and Si2-Series.
The systems are designed to identify issues such as compressed air leaks, electrical connection problems, bearing failures and partial discharge by detecting heat and sound that may appear before visible equipment failure. The iXX-Series combines thermal imaging with app-based inspection workflows. The i34 offers 240 × 320 resolution, while the i64 provides 480 × 640 resolution. Both models provide measurement accuracy of ±2°C or ±2% and support guided inspection procedures directly on the camera.
The guided workflows are designed to help technicians follow consistent inspection routes and capture comparable data. Results can be uploaded to FLIR Assetlink for route planning and asset condition monitoring or to FLIR Ignite for trend analysis and work-order management through a connected CMMS.
For applications requiring higher resolution and wider temperature measurement ranges, the Exx-Series includes models ranging from the E54 to the E96. The E96 offers 640 × 480 resolution and temperature measurement capability up to 1,500°C. Laser-assisted autofocus is available on the E76, E86 and E96 models to help users maintain accurate focus during inspections.
The T-Series is designed for difficult-to-access inspection targets. Its 180-degree rotating lens platform supports inspections of overhead cable trays and floor-level pumps. FlexView dual field-of-view optics and an optional 6-degree telephoto lens provide additional flexibility for applications such as switchyards and flare-tip inspections.
Teledyne FLIR will also demonstrate its Si2-Series acoustic imaging cameras, which combine acoustic imaging with a 12-megapixel visual camera. The system uses 124 low-noise MEMS microphones and can detect sound sources from distances ranging from 0.3 metres to 200 metres.
The Si2-LD is designed to identify pressurised air and gas leaks as well as mechanical faults. The Si2-PD focuses on partial discharge detection in high-voltage equipment, while the Si2-Pro combines both capabilities and can quantify leaks involving gases including hydrogen, carbon dioxide, methane, helium, argon and ammonia.
The cameras provide on-device decision support to help operators assess detected issues and estimate potential costs associated with leaks. According to Teledyne FLIR, the technology can help identify efficiency problems significantly faster than conventional inspection methods. For hazardous and classified environments, the Si2x models offer similar acoustic inspection capabilities for ATEX and HazLoc applications.
The technologies on display at OGA 2026 are aimed at helping oil and gas operators improve predictive maintenance, identify developing equipment problems and strengthen plant reliability and safety through faster inspection and better condition monitoring. Teledyne FLIR is a global provider of thermal imaging, visible-light imaging and sensing technologies used for inspection, safety, security and industrial applications.
The company develops thermal cameras, acoustic imaging systems and advanced inspection solutions that help industries detect equipment problems, gas leaks, electrical faults and other issues at an early stage. Its technologies are used across sectors including oil and gas, manufacturing, utilities, aerospace, defence and public safety, helping organisations improve reliability, maintenance and operational efficiency.