ENCY has released version 3.2 of its CAM software, introducing enhancements designed to reduce repetitive programming work, improve control over surface finishing and simplify machining setup. The update includes reusable tooling configurations, scallop-height controls, automated fixture positioning and improvements to Face Milling operations.
A key addition allows users to save a complete tool set in assembly mode and load it into another machining project. This is particularly useful when multiple parts are produced on the same machine, as programmers can reuse established tooling configurations instead of rebuilding them for each job. Changes to shared tools, including magazine positions and adapters, can also be applied across all associated operations. A component panel displays occupied and available magazine pockets, making tooling organisation easier.
ENCY 3.2 also simplifies workholding setup. Users can drag clamps towards the stock, machine table or fixture plate, with the software highlighting suitable positioning levels and snapping the clamps into place. This reduces the need for manual coordinate entry when preparing machining setups.
The update provides greater control over finishing operations through scallop-height settings in Combo Finish. Programmers can specify the allowable scallop height, enabling the software to determine the spacing between finishing passes based on the required surface quality. Roughing Waterline also uses scallop height to distribute intermediate levels according to tool geometry. It places levels closer together on shallow slopes while avoiding unnecessary passes along vertical walls. Another improvement allows users to complete one surface region before moving to another without duplicating the machining operation, simplifying sequencing and subsequent project adjustments.
Face Milling has been enhanced to account for workholding during toolpath generation. The operation now trims machining passes against part and fixture geometry, while transfer moves use a clearance plane above clamps. In zigzag machining patterns, it also reduces unnecessary air passes over material that has already been removed. These changes help programmers account for fixtures more directly while retaining control over the machining approach.
The release also includes updates for robotic machining and sheet cutting. Improved feature recognition in 6D Contouring supports robotic trimming and spatial contouring, while supported cladding operations benefit from evenly spaced passes across the processing zone.
For nesting applications, users can now view the dimensions of reusable sheet remnants to assess available material for subsequent jobs. Undo and Redo functionality has also been extended to parameter changes, allowing users to experiment with layout settings and restore earlier configurations.
Additional improvements include faster project opening, enhancements to the feeds and speeds calculator, and fixes across toolpath calculation, simulation, project handling and robotic machining. ENCY 3.2 is available through the software’s built-in updater to customers with an active Software Maintenance Contract. The complete list of enhancements and fixes is available in the release notes.