SEKISUI CHEMICAL CO, led by President Keita Kato, has revealed plans to build its sixth manufacturing facility in India. This new plant will be located in Pune, Maharashtra, and will produce injection-molded components for the automotive industry under SEKISUI DLJM MOLDING PRIVATE LIMITED. The investment for the new facility is estimated at $3 million, with operations set to begin in January 2026.
This expansion is part of SEKISUI CHEMICAL’s strategy to bolster its injection molding business, which plays a pivotal role within its High Performance Plastics division. Focused on the rapidly growing mobility sector, the company aims to capitalize on the increasing demand for automobile parts in India. SEKISUI DLJM MOLDING, a joint venture with local partner Dipty Lal Judge Mal Private Limited, has been operating since 2011 and has seen steady growth, aligned with India’s rising motorization.
Pune, a hub for major automobile manufacturers, was chosen as the location for the new plant due to its strong industry presence and expected growth. This new facility will increase SEKISUI CHEMICAL’s production capacity in India by about 15%, supporting further business expansion in the region.
The new SEKISUI CHEMICAL injection molding facility is being established in Pune, Maharashtra, with the site strategically located in the Chakan District. This area is well-known for its concentration of automobile manufacturers, making it an ideal choice for the company’s expansion into the automotive sector. The plant will span a total area of 10,044 square meters, with a dedicated production floor covering 6,288 square meters. It will focus on manufacturing injection molded parts for both automobiles and motorcycles, addressing the growing demand for such products in the region. Operations at the facility are expected to commence in January 2026, marking an important milestone in SEKISUI CHEMICAL’s expansion efforts in India.
This new facility in Pune is a critical part of SEKISUI DLJM MOLDING’s long-term strategy to increase its production capacity and revenue. The company has set an ambitious goal to reach $130 million in net sales by the fiscal year 2030. This target will be driven primarily by the operations of the new plant, which is expected to boost the company’s overall production capacity. Additional growth initiatives are also in the pipeline to further solidify SEKISUI DLJM MOLDING’s position in the automotive market, particularly in India, which is witnessing rapid growth in its motorization and automotive industries.
SEKISUI DLJM MOLDING is a joint venture between SEKISUI CHEMICAL and Dipty Lal Judge Mal Private Limited, with SEKISUI CHEMICAL holding a 51% stake and Dipty Lal Judge Mal Private Limited owning the remaining 49%. The joint venture was established in 2011, and since then, the company has expanded its operations, which now include multiple production sites and plants. In addition to the Pune facility, SEKISUI DLJM MOLDING operates four other sites with five plants as of March 2025. This expansion reflects the increasing demand for high-quality injection molded products in India, driven by the rise in motor vehicle production and sales.
Dipty Lal Judge Mal Private Limited, a key partner in the joint venture, has been in operation since 1984. The company manufactures and sells a wide range of injection molded products, including components for consumer electronics. With a capital investment of 45 million rupees, Dipty Lal Judge Mal Private Limited employs 428 people as of April 2025. For the fiscal year 2024, the company reported sales of ¥13.6 billion, which is calculated based on a conversion rate of 1.77 yen to 1 rupee. This strong track record in manufacturing and sales positions the company as a vital partner in SEKISUI CHEMICAL’s growing presence in India.
SEKISUI TECHNO MOLDING, a wholly owned subsidiary of SEKISUI CHEMICAL, plays a crucial role in the company’s global injection molding operations. Founded in 1962, SEKISUI TECHNO MOLDING specializes in the production of a wide variety of injection molded products, including those used in automotive parts, logistics, and civil engineering. The company has a capital of ¥200 million and employs 167 people as of March 2024. With sales totaling ¥21.8 billion in 2024, SEKISUI TECHNO MOLDING has established a strong presence in both domestic and international markets, contributing significantly to SEKISUI CHEMICAL’s overall success.
SEKISUI DLJM MOLDING, the joint venture established in 2011, is focused on the manufacture and sale of injection molded vehicle components. The company has steadily grown, achieving ¥10.7 billion in sales for fiscal 2024. With SEKISUI CHEMICAL holding a majority stake in the venture, SEKISUI DLJM MOLDING operates multiple production facilities and continues to expand its footprint in India’s automotive sector. The company’s extensive operations, which include five plants across four production sites, highlight its ability to meet the increasing demand for automotive parts in one of the world’s fastest-growing car markets.
